The Draper Chain Saw is a chainsaw with a 40 cm (16 in) bar and petrol power.
A 40 cm bar cuts a log of about 40 cm in a single pass, and is at its most comfortable on timber up to roughly 35 cm. Thicker wood is not impossible, since cutting from both sides doubles the effective capacity, but it is slower and harder to keep straight.
The specification lists an output of 1.73, a 1300W motor.
It is fitted with low-kickback chain.
Petrol suits firewood, felling and work away from power. Budget for a 50:1 two-stroke mix unless the manual says otherwise, keep the bar oil topped up, and do not store it over winter with fuel in the carburettor. It is a homeowner grade machine, intended for occasional use rather than daily work.
This model is no longer stocked by the retailers we track. The specification is kept here for anyone researching a saw they already own or are buying second hand, and a current equivalent is linked below.
Specifications are as published by the manufacturer or the retailer listing rather than measured by us. Always check the figures on the product page before buying.
This model is no longer available
The specifications below are kept for reference. For a current equivalent, see:
Draper 45cc Petrol Chainsaw | 1.7KW 2 Stroke 11000 RPM Engine | 450mm 18" Oregon Bar® | Ea See on Amazon
Features
| Grade | Home Owner |
|---|---|
| Type | Petrol/Gas |
| Horsepower | 1.73 |
| Bar Length | 40 cm (16 in) |
| Model Number | 02567 |
Overview
| Product Length CM | 42 |
|---|---|
| Product Width CM | 26 |
| Product Height CM | 28 |
| Type | Petrol/Gas |
| UPC/ASIN | B07KGSN8QJ |
| Color | Green |
| Wattage | 1300 |
Chain & Bar
| Chain & Bar Included | Yes |
|---|---|
| Tool-less Chain Tensioning | No |
| Chain Brake | No |
| Low Kickback | Low |
Power Head
| Engine Cycle | 2 Stroke |
|---|---|
| CC | 37.2 |
