AOSOME 26cc Petrol Pruning Chian Saw

     
Editor's Rating: 8/10
     
User's Rating: 7.5/10

On paper the AOSOME 26cc Petrol Pruning Chian Saw comes down to a 25 cm (10 in) bar and petrol power.

The usable cutting length is 25 cm, which puts this saw squarely on timber up to around 20 cm. The working rule is to keep the bar about 5 cm longer than the wood you cut most.

The specification lists an output of 1.2, a listed weight of 5.3 kg.

It is fitted with a chain brake, tool-free chain tensioning, low-kickback chain.

Petrol suits firewood, felling and work away from power. Budget for a 50:1 two-stroke mix unless the manual says otherwise, keep the bar oil topped up, and do not store it over winter with fuel in the carburettor. It is a homeowner grade machine, intended for occasional use rather than daily work.

This model is no longer stocked by the retailers we track. The specification is kept here for anyone researching a saw they already own or are buying second hand, and a current equivalent is linked below.

Specifications are as published by the manufacturer or the retailer listing rather than measured by us. Always check the figures on the product page before buying.




This model is no longer available

The specifications below are kept for reference. A comparable model you can buy now:

STIGA SPR276C pruning chainsaw CARVING 25 cm 10"  See on Amazon

Features

GradeHome Owner
Type Petrol/Gas
Horsepower1.2
Bar Length25 cm (10 in)
Model NumberASCS 2500
Weight KG5.3
Weight Pounds11.68

Overview

Product Length CM50
Product Width CM23
Product Height CM23
Type Petrol/Gas
UPC/ASINB07S9BK7RT
Color red
Noise Level (decibels)117

Chain & Bar

Chain & Bar IncludedYes
Chain Pitch3/8"
Chain Gauge0.050"
Bar OilerAutomatic Oiling
Tool-less Chain TensioningYes
Chain BrakeYes
Low KickbackLow

Power Head

Engine CycleSingle-Cylinder, 2-Stroke, Air-Cooled
CC26
Fuel Capacity230
Chain Oil Capacity160
Maximum RPM's12500
Handle TypeTop Handle
Fuel Mix40:1







Leave a Review

Your email address will not be published. Required fields are marked *