STANLEY SCS-52 Jet 52cc 18′ Petrol Chainsaw pairs a 41 cm (16 in) bar and petrol power.
With 41 cm of bar, expect to deal with logs up to about 36 cm without thinking about it, and up to 41 cm in one pass. Beyond that you are working from both sides, which is fine for firewood and poor for felling.
The specification lists an output of 2.9, a 2100W motor, a listed weight of 6.5 kg.
It is fitted with a chain brake, low-kickback chain.
Petrol suits firewood, felling and work away from power. Budget for a 50:1 two-stroke mix unless the manual says otherwise, keep the bar oil topped up, and do not store it over winter with fuel in the carburettor. It is a homeowner grade machine, intended for occasional use rather than daily work.
Specifications are as published by the manufacturer or the retailer listing rather than measured by us. Always check the figures on the product page before buying.
Features
| Grade | Home Owner |
|---|---|
| Type | Petrol/Gas |
| Horsepower | 2.9 |
| Bar Length | 41 cm (16 in) |
| Model Number | SCS-52 JET |
| Weight KG | 6.5 |
| Weight Pounds | 14.33 |
Overview
| Product Length CM | 27 |
|---|---|
| Product Width CM | 30 |
| Product Height CM | 48 |
| Type | Petrol/Gas |
| UPC/ASIN | B071JKHRPS |
| Color | Yellow |
| Wattage | 2100 |
Chain & Bar
| Chain & Bar Included | Yes |
|---|---|
| Bar Oiler | Automatic Chain Lubrication |
| Tool-less Chain Tensioning | No |
| Chain Brake | Yes |
| Low Kickback | Low |
Power Head
| Engine Cycle | JETFORCE 3 engine |
|---|---|
| CC | 52 |
| Fuel Capacity | 0.5 |
| Maximum RPM's | 4300 |
| Fuel Mix | 40:1 |
